Tenant Logo

Freight International is a fictitious freight operator with forty bogie hopper wagons (FI 81001 to 81040, class HPR) and a depot that maintains them. Every company, person, wagon number and document here was made for this demonstration.

Its maintenance instruction, FI-VMI-HPR-001, was written by ExcelWraps with illustrative limits. It sets three regimes: a trip inspection every week, planned preventative maintenance every six months, and a vehicle inspection and brake test every year. All three sit on one contract, FI-HPR-01, so each wagon's whole history is in one place.

Who takes part

Nicola Barnes (NB), Freight International engineering (the owner)

Reads everything and approves arising work, with comments.

Conor Byrne (CB), Depot manager

Launches visits, decides each AAW, closes it and freezes the record.

Yvonne Ashworth (YA), Team leader

Follows the work in progress across the depot.

Lee Harding (LH), Examiner

Trip inspections and planned maintenance.

Patrycja Zielinska (PZ), Examiner

Trip inspections and planned maintenance.

Marcus Oduya (MO), Examiner

Planned maintenance and the yearly brake test.

What happened to each wagon

- 81001: a clean weekly trip inspection, and a second one a week later: its history in one place.

- 81002: damage found on the left side, raised as additional arising work (AAW) with a photograph. The wagon stopped until decided.

- 81003: the maintenance due label missing, raised as an AAW.

- 81004: an observation AAW on a task that passed.

- 81005: a clean six-monthly visit, then a second one: the wheel flange wear shows on the trend chart.

- 81006: worn door split pins renewed through the instruction's own arising work rows, with the material recorded. A brake block below the 15 mm limit raised as an AAW and the blocks renewed.

- 81007: grease loss at an axlebox. The depot manager decided the route, Freight International approved with a comment, and the wagon could not be signed off until the AAW was closed.

- 81008: a flange reading first entered below the 26 mm limit was refused. The wheel was measured again.

- 81009: a clean yearly vehicle inspection and brake test.

- 81010: a coupling renewed. Brake test step 8 failed and an overdue pressure gauge was recorded: both raised as AAWs, and the test repeated with a gauge in date.

- 81011: its six-monthly visit launched and left in progress.